1. Prepare the surface before waxing by removing previous waxes and sealants. The best way to do this is by light machine polish, an example would be Scholl Concepts S40 with a soft pad. Followed by a thorough wipe down using an alcohol-based panel wipe like isopropanol.
2. Take 1-2 swipes from the pot, only use soft foam to apply this wax. Once you have loaded the applicator proceed to press it over a small area of the panel several times, this creates an even application by collecting more wax as you work across the panel. Always ensure an even thin layer is applied, over-application will have negative effects on removal and performance.
3. Remove the wax with a short pile towel like our blue removal coth after 1-5 minutes maximum, this means only 1 panel at a time. It is normal to see a hazy residue after initial removal. Removing this residue is done by using our plush yellow buffing towel, wipe in straight lines to ensure the light residue has been removed.
5. After application, allow 3 hours for this wax to bond before wetting the vehicle and do not wash for 7 days after application.